1956 Chrysler hemi water pump repair kit (354)

Description

Store Info:
Store-business hours
:
Monday-Friday 9am-3pm Oregon west coast USA Time.
Closed:
Weekends and all USA Holidays starting the day before.
Processing time :
The item will be shipped within 3-5 of our business days starting the day after the payment has cleared Paypal.
(NO same day shipping and NO rush shipping)
Item Description:
This Auction is for 1 Repair kit for a Water pump:
Application:#
1954-56 Chrysler V8 cylinder HEMI
for water pump cast#1537947
and after market casting#P140-1& 320
V8 engines
(241-1955)
( 301,-1955-56)
331-1954-56)
(354-1956)
this kit comes with
1,new bearing
1 new oem type seal
1 complete mounting gasket set and backing plate gasket
NOTE/WARNING this kit will not work on some water pumps that have been rebuilt before using oversize parts,
you must take your old pump apart and measure the fan-hub and impeller if it is
oversize already those 2 parts are no good anymore for reuse. and this kit will not work for you,
the bearing is a new oversize shaft bearing
if your pumps old bearing is already oversize than this kit will not work for you
standard size shaft is .6250
oversize shaft is .6270
if your shaft is oversize you will have to replace your hub and impeller ,there is a master overhaul kit available
OEM Casting #
if your old bearing shaft and drive hub has a hole in it  this new modern shaft is over size and Does Not require a pin for safety
aftermarket casting#
Info About This Sale:
You are Buying a rebuilding /repair kit for a water pump, like the one in the picture.
This sale is for a oem type rebuilding kit for most oem water pumps in rebuild-able condition,
WARRNING THIS KIT WILL NOT WORK FOR ALL Chrysler WATER PUMPS only the ones listed in this ad.
restrictions apply do to modification,ware, along with many other factors do not assume it will? please follow instructions in ad to confirm what parts you need for your exact pump and ask questions and make sure your old pump has been taken apart to match the parts to this kit.
Options available:
You can have this kit installed in your old pump from our rebuilder for $ 175.00 labor plus return shipping costs  or have your old pump rebuilt for 300.00$. Look in our store or ask for more details.
We buy OEM water pump cores =old used OEM water pumps send 5 pictures or call 9515430138
Requirements for buying and using a kit
#1 all kits are required to be installed by a experienced re-builder only,
the rebuilder must have experience in re-building this model pump and has the proper tools and equipment and know-how,
under no circumstance should any one else attempted it,
#2 required by the purchaser-buyer to read all info in regards to the ad info and sale,
description and installation and handling of all parts and all company policies before buying,
#3 the pump must be first taken apart to measure and match each part in the pump
to the parts in this kit if you do not ask for a different dimension part you get the standard OEM part size
#4 variations,
the kits that we supply are the same type parts style and dimensions
as the O,E,M parts that were use in the beginning when the pump was first manufactured,
Now because of its age over time people use different parts when re-building them
and a lot of the people modify the pump to take different parts in order to re-build it,
Its very important to take your old pump apart and measure and match all the parts
to this kit before buying and to ask for the different type parts if your pump
has been modified we have a lot of other sizes and styles of seals its up to you
to tell use if you need anoth
er type before we ship remember you have the pump not us, ask about your parts dimensions
verses our parts?
NOTE if you do not ask for a different type seal you get the oem type and you will have to deal with it you will own the parts no returns so measure first?
# 5
must have a assembly press arbor type or hydraulic min 3tons with a pressure gauge to measure how much pressure is being used to move the parts,
#6 these parts require a minimum of 15000. lbs of pressure to move them
So please as soon as you receive this kit match and measure all the parts first DO NOT USE them until you are sure they will work if you think they are different please let us know asap and we will let you know if they will work for you ,
t
-1
Please read before buying thanks
What you need to do and find out before you order and buy this kit,
First thing you need to do it’s very important you must first take your old water pump apart to find out what seal type was used the last time it was rebuilt,
Necessary Step for installation of kit
About machining this type of water pump with a built in seat area made of cast iron,
this type of water pump has a built in mating seat area that the seal face seals against
#1, the seat area must be properly machined supper smooth, flat-level to the bearing area-shaft, it must be able to mate properly to the seal face and to seal out water and must be supper clean,
NOTE
if it is rough or uneven or UN level in any way it will damage the seal and it will leak.
#2, this is also why it very important to have the water at all times super clean and free of any contaminants or rust.
#3, looking at the pictures you can see how smooth the seal face and seat face are and need to be.
#4, tools,needed for rebuilding, #1, a 3 ton plus arbor or hydraulic type press, #2,special water pump assembly and dis-assembly tools,#3, special water pump parts installation tools,#4, experience in rebuilding this type of water pump,#5,know how in the way of dues and do not of supporting,the pump and what direction to go and not to go, and so on in other words water pump rebuilding experience.
#5, the right type of machining bit for cast iron, make sure the bit used in machining the seat is made to be used on mixed cast iron, or it will never come out smooth.
NOTE ALL ORIGINAL PUMPS HAVE A MACHINE SEAT BUILT INTO THE Housing THAT MUST BE MACHINED SMOOTH level and polished TO SEAL AGAINST THE SEAL FACE BEFORE USING A NEW SEAL or it will damage it and it will leak.
ITS VERY IMPORTANT TO HAVE A MACHINE SHOP DO IT RIGHT so that it will not leak or damage the new seal.
My
REBUILDERS can do IT FOR .00 plus the return shipping cost.
Warranty Info:
Warranty No Warranty at all
WARNING once you use-install-try to install these parts you will own them and owe us the price of the used and now damaged parts no matter what
once a part is used it is no longer new and you will owe us the cost for a new part no matter what eBay or Paypal does or say
note we will legally seek out compensation in California court for recovery of funds.
The parts sold are new and once you make them used or broken or damaged its all on you to pay for them or there replacements no matter what''
So please as soon as you receive this kit match and measure all the parts first DO NOT USE them until you are sure they match your old parts and will work for you
if you think the are different please let us know asap and we will exchange them or replace them by asking you to return them before they are used,
Shipping-Handling:
THE SHIPPING To BUYER Info:
All packages require a signature to receive it.
NO same day
shipping.
NO PO BOX
shipping.
You must supply us with a
physical address.
Buyer pays
all
shipping and our handling costs.
No Combined shipping
All international buyers
must
supply a
email and phone number
for customs to contact them to pick up their item. Buyer is responsible for all duties, taxes and all cost
when buying more then 1 item buyer is responsible for increase in shipping cost for combined shipping for multiple quantities box is limited to 2 kits  the calculator is not correct for multiple kits buyer will be billed the difference after purchase and must pay before we will ship
About us:
We at Dragon -up have been selling Re-manufactured Water & smog Pumps for over 25 years.
Along with supplying used-cores , re-build able auto parts with date codes for rebuilding ,and the rebuilding service for them too.
Take a look at our feedback to see all the Happy Buyers.
ABOUT OUR RE-MANUFACTURING SUPPLIER
Label name (AUTO-PAC)
Company name(AUTO PARTS REBUILDER)
They are 3rd generation re-manufacturing company since the 1950'S.
They are a hands on, one on one, parts Re-building service.
They only use the highest quality parts and unsurpassed quality labor performed by a Master Re-Builder.
NOTE
: They Rebuild All Water and Smog pump Types, Years and Models
ABOUT THIS LEGAL PURCHASE CONTRACT
(you the purchaser will be entered into with Dragon-up.)
By action of purchasing and using the/buy it now and by payment, The buyer Represents to Dragon-up that the buyer is electronically Signing This Purchase Contract Which Will Have The same Effect as The Execution of This Purchase Contract by Written Signature,
The buyer will now be legally bound to this Contract and has agreed to this Contract and confirms that the buyer has read this ad and all Dragon-ups store policies that apply to this Sale and all costs
All sales are final. No refunds. No returns.
*FOR Further Info See Store Pages and Policies.
**Note: Warranty & Info instructions sheet is inclosed inside the box with part.
Track Page Views With
Auctiva's FREE Counter